Mods For Accuracy

[caker_chris]

What kind of mods do you guys and gals recommend for bttr accuracy?

By the way I have an ics m4 sir if that helps any.

[TheReaper]

I like changing out my hopup nub for a big out H-hop - its a quick, cheap, easy thing to do.

[caker_chris]

i will look in to that, what about a tightbore inner barrel? any recommended brands and bore size?

[TheReaper]

I'd go with a 6.03 tightbore. 6.01 would probably give you a nice FPS boost, however you need to make sure you use high quality bbs, as you'll be more susceptible to jams. I'd recommend edgi or prometheus.

[caker_chris]

what is the standard bore size on your average gun and will the barrel make that much of a difference in accuracy?

as well, how much of an fps boost would i get about with a 6.03 and a 6.01? i could use alittle more muzzle velocity especually for the outdoor games.

[TheReaper]

The standard, atleast for Tokyo Marui is 6.08. I'm unsure of the FPS gain between 6.03 and 6.01, as I've only used a 6.01 in my spring sniper rifle. Maybe someone else can chime in on this?

[caker_chris]

alright thanks for the info, i have one final question though, how do i know how long of an inner barrel i need for my ics m4 sir?

[TheReaper]

I don't know about ICS, but some manufacturers list the inner barrel length in the manual that comes with the AEG. You could always just take out your stock barrel, and measure it.

[caker_chris]

yeah the manual that came with the gun says very little, in fact its just the generic m4 manual that applies to all of the m4's. says how to adjust the sights and the hop up and basic stuff like that. No specs at all. Looks like i will have to measure it my self. Thanks for all the info, its been a big help.

[mamba]

Our Trusted accuracy set up 350-450FPS
1. Precision barrel 300mm and above(we prefer prome)
2. Prome, systema, G&P hop up unit ( there's no difference between the 3 if you set it right)
3. Prome hop rubber (soft and hard depends on FPS)
4. Shredders Concave Spacers
5. And of course your airsealing technique.

[caker_chris]

Our Trusted accuracy set up 350-450FPS
1. Precision barrel 300mm and above(we prefer prome)
2. Prome, systema, G&P hop up unit ( there's no difference between the 3 if you set it right)
3. Prome hop nub (soft and hard depends on FPS)
4. Shredders Concave Spacers
5. And of course your airsealing technique.

i have to ask, what are shredder concave spacers and what do you mean by air sealing technique?

[mamba]

i have to ask, what are shredder concave spacers and what do you mean by air sealing technique?

I have read a lot of skeptics above SCS but I have proven it myself
http://i272.photobucket.com/albums/jj188/msang17/SCS/SCS44-1.jpg

Explains it more precisely.
http://i272.photobucket.com/albums/jj188/msang17/SCS/SCSConceptEdited.jpg

Then I bought half a dozen, installed on all of my AEG's.
http://i272.photobucket.com/albums/jj188/msang17/SCS/IMGP2588.jpg

I have imported it from the Phillipines and all of my Airsoft stuff.......from US,Taiwan, Japan and of course from airsoft mecca Hongkong.


First 2 pics, courtesy of Shredders himself.

[caker_chris]

where do you get those things?

[mamba]

where do you get those things?

As mentioned!

It is not available here in UK, so I have to import it.